Mold can be extremely dangerous to your health, causing things like allergic reactions, headaches, and respiratory problems. Not only that, but it’s also incredibly hard to remove on your own if you don’t know what you’re doing. Luckily, there are plenty of ways to remove mold from your roof that you can do on your own – provided you know how to get rid of mold in the first place!
Here are some ways you can remove mold from your roof.
Repair Your Roof
A roof shampoo is a great way to remove mold from your roof and keep it looking new. You can do this yourself with a few simple supplies, or you can hire a professional to do it for you. Either way, make sure you repair any damage to your roof before shampooing it to avoid further damage. Roof shampoos are not made for roofs that have sustained water damage because they will leave behind residue that will attract more mold. If the roof has sustained significant water damage, you should contact a roofing contractor instead of trying to shampoo the roof yourself. Roof shampoos work best on flat roofs because they are designed to get into the cracks between tiles or tar and the roof itself.
Gutters
One of the most important ways to prevent mold on your roof is to keep your gutters clean. When gutters are clogged with leaves and debris, they can’t do their job of channeling water away from your roof and home. This can lead to water seeping into your home, which can cause mold and mildew to grow. To keep your gutters clean, be sure to remove leaves and debris regularly. You should also make sure that there isn’t any standing water near your house or in the gutters themselves. You can also invest in gutter guards to block out leaves before they get stuck inside the gutter system.
Solar Screens
A solar screen is a great way to keep your home cool in the summer and remove mold at the same time. By blocking out the sun’s rays, solar screens can keep your attic cooler, which will prevent mold from growing. Solar screens are also easy to install and can be found at most home improvement stores. They typically cost around $20-$50 per square foot, depending on how much coverage you need. Solar screens work best when they’re mounted directly over the windows of your house, but they can also be installed along walls or ceilings.
Hire a Professional Service
One of the best ways to remove mold from your roof is to hire a professional service. This is because they have the knowledge and experience to safely and effectively remove mold. They will also be able to provide you with advice on how to prevent mold growth in the future.
Many companies offer this type of service, so it won’t be difficult for you to find one. As long as they do not cut corners or use unsafe methods, then you should go ahead and hire them. Some people might decide to try DIY methods but these can lead to more problems down the line like structural damage. If you want to be 100% sure that the mold has been removed from your roof properly, then hiring a professional is highly recommended.
Improve Exterior Ventilation
One of the best ways to prevent mold is by improving your roof’s ventilation. This will ensure that any moisture that does get on your roof will quickly evaporate instead of sitting and fostering mold growth. You can improve your roof’s ventilation by installing ridge vents, soffit vents, or both.
Ridge vents are installed along your roof’s ridge, and they pull moisture-laden air up and out of your attic. If you install them correctly and make sure they’re level-they can actually increase your home’s ventilation by helping hot air rise above the cold attic floor.
Replace Home Plumbing Leaks
One of the most common ways that mold enters a home is through plumbing leaks. Even a small leak can allow mold spores to enter your home and begin growing. If you have any leaks in your home, it’s important to repair them as soon as possible to prevent mold growth. It may be necessary to replace some of your pipes if they are old or rusty. It’s also important to clean up any standing water or moisture on surfaces that come into contact with water.
Fix Any Cracks and Openings
Cracks and openings in your roof are the perfect places for mold to start growing. To prevent this, make sure to fix any cracks or openings as soon as possible. You can use caulk or roofing tape to seal up any cracks or holes.
Clean any Debris Left on Your Property
The first step in removing mold is to clean up any debris that’s left on your property. This includes leaves, twigs, and any other organic material. If you have a lot of molds, you may want to consider hiring a professional to help with this step. It can be tough to do it all yourself. It’s also important to make sure the roof is free of standing water or snow before starting work. These can create new places for mold to grow. You should remove any excess moss on the roof with a stiff brush or pressure washer, then rinse it off with a hose or power washer.
Do a Thorough Air Duct Cleaning
One of the best ways to remove mold is to do a thorough air duct cleaning. This will remove all the mold spores from your home, and it will also help improve the quality of your indoor air. In addition, doing a thorough air duct cleaning will also help improve the efficiency of your HVAC system. It’s important to note that it’s not enough just to get rid of the mold on your roof. You’ll need to have this cleaned on an annual basis if you want to keep your house clear of dangerous bacteria.
Conclusion.
These are the most effective ways to remove mold from your roof. Some require professional assistance, while others you can do yourself. Be sure to take action as soon as you notice mold so it doesn’t have a chance to spread and cause further damage.
